Management of concrete structures requires an understanding of the deterioration processes involved and the rate at which they proceed.Intelligent monitoring is automated monitoring which explicitly provides information on current condition and deterioration rates to assist in predicting the rem....

Following the high profile gas explosions at Loscoe and Abbeystead during the 1980s, a number of reports were published in the 1990s on the measurement of ground gases, the assessment of risk such gases may present along with the measures that can be employed to mitigate these risks. More recent....

The Institution of Civil Engineers presents the ICE Manual of Construction Materials: Polymers and Polymer Fibre Composites. This book is a specially published section of the larger work, ICE Manual of Construction Materials. Polymers and Polymer Fibre Composites are sections 6 and 7 of the two ....

The Institution of Civil Engineers presents the ICE Manual of Construction Materials.This comprehensive guideis an invaluable resource for practising civil and structural engineers in consulting firms, government agencies, research institutes, universities and colleges. Its highly practical appr....

Prof Forde and his team should be congratulated on this tour de force and readers should lose no time in securing their copies. Dr Ian Sims, RSK STATS Limited

Eurocode 2: Design of Concrete Structures will apply to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete.

EN 1994-1-1, also known as Eurocode 4, is one standard of the Eurocode suite, and describes the principles and requirements for safety, serviceability and durability of composite steel and concrete structures. This Designers guide provides the user with guidance on the interpretation and use of ....

With the finalisation of Eurocode 3: Design of Steel Structures,the Institution of Civil Engineers presents the Designers Guide to EN 1993-1-1.This textcovers many forms of steel construction, and provides the most comprehensive and up-to-date set of design guidance currently available.

The Institution of Civil Engineers presents thisbook as an authoritative guide to the technical background and practical aspects of this European code of practice that will supersede corresponding national codes in the countries that are members of the European Standardisation Organisation - CEN....

This guide describes the principles and requirements for safety, serviceability, durability andbest practiceof concrete bridges.It provides the user with guidance on the interpretation and use of EN 1992-2, and the relevant provisions of the general rules of EN 1992-1-1. The provision of backgr....

The Institution of Civil Engineers presents this guide as an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included, along with appropriate text, to illustrate the use of the Eurocodes for spe....

EN 1993-2, also known as the Eurocode 3 for steel bridges, describes the principles and requirements for safety, serviceability and durability of concrete bridges.

EN1991-1-4, Eurocode 1: Actions on Structures, General Actions Part 1-4: Wind actions, is the head code for wind actions on structures, and describes the principles and requirements for calculating design wind loads on structures. It complies with the requirements of Eurocode EN1990, Eurocode: B....

The fully revised, restructured and updated second edition of the ICE Manual of Bridge Engineering has been written and edited by a team of leading experts, and presents valuable contributions from across the field within a single resource. The second edition comprehensively addresses key topic ....

The Institution of Civil Engineers presents the Designers' Guide to Eurocode 1: Actions on Bridges. This book forms part of theDesigners Guides to the Eurocodes series, whichprovides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and work....