A new way for our members to access the huge wealth of knowledge content ICE has. Organised into bite-sized modules.
Our learning is structured around these key areas:
Courses, workshops and membership surgeries to help you achieve professional qualification.
Access videos covering key areas of professional qualification.
Courses, help and advice to advance your career no matter what stage you are at.
Specialist training courses let you learn new skills and add to your personal development.
Earn new qualifications to boost your career and demonstrate your abilities.
This case study explains the management strategy that Breheny Civil Engineering employed to deliver an environmentally sustainable 2.4km road scheme that was delivered 6 months ahead of schedule.
Bedford Western Bypass is a long awaited improvement link to the west of Bedford Town Centre. The new bypass links the A6 Paula Radcliffe Way with the A4280 Bromham Road and enables vehicles to avoid the Town Centre when travelling in the north west of the town.
Breheny Civil Engineering were appointed in 2014 to construct the 2.4 kilometre single lane road, build 3 new roundabouts, a new bridge over the Midland Mainline Railway and realign part of the A6 Paula Radcliffe Way Roundabout.
Breheny Civil Engineering set a project goal for the Bedford Western Bypass that no bulk materials be taken from site. The design of the bypass included 128,000m^3 of bulk earthworks cut and fill which included 22,000m^3 of archaeologically excavated material that had been identified as unsuitable for engineered fill (Class 4). A phased strategy was developed by the team that allowed the earthworks to advance on two fronts, working towards the railway that divided the site. This had the potential to offer massive programme savings as productivity could be doubled.
Fill was transported to the eastern embankment via road vehicles whilst the western embankment was constructed simultaneously using articulated dump trucks. Each team were given production targets which were monitored and reviewed daily. This kept the operation efficient and minimised the duration of the export operation and impact on the local road system. A wheel wash was deployed at each site entrance and supplemented with road sweepers to keep mud off the roads.
The calculation of the reduced impacts of this decision reduced the following:
In addition, approximately 2,000m^3 of hard breakout material was processed on site into 6F2 capping and utilised in the works, this came from the removal of existing hard landscaped areas.
This proactive solution to dealing with the earthworks on the project offered a sustainable solution which dramatically reduced the need for lorry movements from the site, this not only directly reduced CO2 emissions from the site traffic it also reduced the number of lorries on the surrounding roads, reducing CO2 and potential congestion to local traffic.
The Great Ouse river corridor is not only a stunning part of the Bedfordshire landscape but is also home to a wide variety of native flora and fauna. The scheme was developed to not only protect existing wildlife in the area but to also create new habitats for amphibians, birds, badgers and otters. As part of drainage improvements to areas of sedge adjacent to the Great Ouse, new ditches and widening of existing ditches were to be installed. Timber weirs were constructed to create areas of wetland.
The original scheme involved creating access tracks to complete the works in the County Wildlife site using crushed concrete as the foundation and running surface. Breheny looked at this situation as planning restrictions forbade rubber tired vehicles in the area as they would destroy the sensitive topsoil.
It was calculated that this method of excavating the topsoil and importing crushed concrete would have involved:
Instead the Breheny team investigated and chose to use aluminium track mats which allowed the work to be carried out without any destructive temporary measures (none of the above was required). The sedge under the track mats recovered within a matter of weeks and thus didn’t require any replanting or disturbance. There was some sedge material excavated in the re-profiling of ditches, this was re-used in the attenuation ponds and is now thriving in a new area.
As part of the scope of work we built a new badger sett and otter holt. With previous badger activity in the area a badger tunnel with badger fencing alongside the bypass were constructed to encourage badgers into the wildlife site.
A programme of surveys and monitoring was undertaken during the scheme. Bird, bat, newt, otter, badger and vole surveys before entering new areas of the site to ensure that none were disturbed during construction works.
As part of the scope of work we built a new badger sett and otter holt. Under the bypass we built a Badger tunnel with badger fencing alongside the bypass.
We undertook weekly noise monitoring and carried out vibration monitoring during the works to ensure 75dB ambient noise levels were adhered to during working hours.
Benefits of our approach included:
With careful planning and consideration for the existing biodiversity of the site, the Breheny team were able to deliver a scheme that was both environmentally sustainable and beneficial to the local area.
Bedford Bypass Project videos:
Simon Andrews, Project Manager, J Breheny Civil Engineering (scheme enquiries)
e: [email protected]
m: +44 (0) 7967 835 090
Steve Dighton, Business Development, J Breheny Civil Engineering (other enquiries)
e: [email protected]
m: +44 (0) 7967 487 228
Do you or your company have a project you'd like to share with civil engineers from across the globe?
Our Knowledge Marketing team sources content from across the world of civil engineering, as well of as offering opportunities for sponsorship.
ICE provides world class training for civil engineers looking to develop their skill set.