Civils structures can typically have an intended ‘design life’ of up to 120 years. But what does ‘design life’ mean? asks Structural Engineer Rifat Bin Ahmed and what if you were able to reduce a structure’s design life down to one year? What design criteria could be relaxed and could this save money?
Understanding the meaning of 'design life' and its influence over design decisions can help engineers optimise economies of scale.
It’s just like designing a phone-case!
To explain my theory, I’d like to make a phone case analogy! If you were to design a phone case, you probably wouldn’t need it to be bullet-proof. But it is probably reasonable to design it to survive a drop from a height of 1.5m, which is the scenario the phone is likely to experience (slipping out of a hand when using the phone for example). There is a spectrum of possible design qualities of phone cases, ranging from surviving meteor impact, down to being broken by accident. Likewise with buildings. Where your design lands on the spectrum depends on the engineer making sound discretionary decisions, on a case-by-case basis. In a nutshell, ‘What is your structure designed to survive?
Functionality and serviceability
A one-year structure is likely to be a temporary work with a fundamentally different design requirement compared to a permanent work. The one-year structure is most likely to have no permanent, serviceability requirements, such as aesthetics, cracks and water tightness.
What the structure will go through?
Overall, the engineer needs to consider what scenarios the structure is likely to experience during its lifespan. What loadings is it required to resist? What environmental change is it likely to experience? What changes will the construction material experience over time?
Some loadings or risks only exist in the long term. For example, you may wish to design against the rise of sea levels for a marine structure. You may also choose to disregard a 100-years return earthquake period if you were to design a structure with a one-year design life, as it is unlikely to happen.
The ‘behavioural problem’ over the long term
Some construction materials exhibit time-dependent behaviour, such as creep and drying shrinkage of concrete. The effects from such behaviours only start to become significant in the long term. Creep and drying shrinkage of concrete depends on several factors including the ambient temperature, humidity and concrete strength.
Natural materials such as soil exhibit time-dependent behaviour too, including consolidation, stress relaxation and creep. Consolidation of soil is the drainage of pore water when the ground is being squeezed. If the ground is relatively impermeable then the ground behaviour is closer to an ‘undrained’ condition, rather than ‘drained’, as there is not enough time for pore water to escape under the pressure. Stress relaxation is the ‘internalization’ of the deformation of soil particles, i.e. some elastic deformation turns into plastic deformation. Creep is the slow and gradual increase of deformation when subject to the same loads over the long term.
Durability of different parts
Not all parts of the structure are born equal. Some auxiliary parts of the structure may have a much shorter design life compared to the main part of the structure. For example, joint sealants may have a design life of 20 years. Bridge bearings may have a life span of 20-45 years. If the whole structure is designed to last for 120 years, the design may be required to eliminate the use of these or have a service plan to inspect and replace them. If the structure is designed for one year's use only, you may choose cheaper alternatives or simply ignore them if you can.
End-of-life considerations
Since the structure is intended to be used for one year only, the designer ought to take into consideration the imminent de-commissioning of the structure. Reusable materials with an ease of dismantling such as metals, rather than concrete, are more likely to be used to achieve economies of scale. The consideration on de-commissioning would be a much less serious consideration for a 120-year structure as your guess on the state of available technology can be wildly off.
It’s all about the quality!
‘Quality’ here does not just mean workmanship; a trendy buzzword for ‘resilience’. How critical is the structure? What is the impact of structural failure? Answering questions such as these will give you an indication on the risk tolerance and influence how much ‘resilience’ is required on the structure, which all translates into structure quality at the end of the day.
You may also be interested in
- Type
- ICE Community blog
5 surprising everyday objects that were invented by engineers
Through the ages, engineers have invented many everyday items that changed our daily lives.
- Type
- ICE Community blog
7 iconic arts and culture venues made possible by civil engineers
A tour of some of the most fascinating structures crafted by the hands and minds of civil engineers.
- Type
- ICE Community blog
President’s Future Leaders – where are they now?
From becoming CEOs to helping design out disaster risk, these engineers show us why this programme is a major success.